Smērviela GREASEN SYNTEX HT 2 400g, ORLEN

General properties
Greasen Syntex HT 2 grease is made based on a high-quality synthetic base oil and a complex lithium thickener. It contains additives that improve anti-wear properties, lubricating characteristics, protection against corrosion and oxidation.
It enables the lubrication of mechanisms subjected to shock loads, vibrations, high dust levels, humidity, and water washout.
Greasen Syntex HT 2 is practically non-melting, antistatic, and compatible with copper alloy elements and many elastomers, allowing lubrication of metal-plastic or metal-rubber friction units.

Application
High-temperature Greasen Syntex HT 2 grease is designed for the lubrication of heavily loaded roller and sliding bearings, as well as other mechanisms in the temperature range from −50 °C to +180 °C.
Due to its high durability, it can be used for long-term lubrication of machines and equipment without re-lubrication at temperatures up to +130 °C under normal operating conditions.
The main application areas of Greasen Syntex HT 2 are metallurgy, the cement industry, the paper industry, as well as the electronics and electrical installation sector.

Standards, approvals and specifications
DIN 51502: KP2S-50
ISO 6743-9: L-X-EFHB-2
NLGI: 2
Approved for use in heavy equipment of Huta Stalowa Wola (HSW)

Physicochemical properties
NLGI grade 2
Worked penetration at 25 °C 285 mm/10
Dropping point 290 °C
Copper corrosion at 100 °C in 3 hours corrosion class 1
Lubricating properties on four-ball tester, weld load 200
Base oil viscosity at 100 °C 172
Structural stability, oil separation from grease 2.6 %

Note
The above physicochemical properties are typical values. Actual values are specified in the quality certificates attached to each product batch.